|
|
|
|
|
|
|
Difference between revisions of "3D Printer"
Jump to navigation
Jump to search
m (Reordered page. still in need of large printer image) |
m |
||
| Line 1: | Line 1: | ||
{{Otherlang2 | {{Otherlang2 | ||
}} | }}{{SB Infobox Begin | ||
== | |{{SB Infobox Header | ||
|image=[[Image:3D_Printer_Small.png]] | |||
|factionLogo= | |||
[[ | |caption= | ||
|name= | |||
< | |border=none | ||
Used with station or ship blueprint chips to automate the building of a blueprint. | }} | ||
|{{SB Infobox Device General Information | |||
|type=Station device | |||
|function=Constructs station parts | |||
|availability=[[X Constructs]] | |||
|size=216×108×216 cm | |||
|mass=32,128.85 | |||
|volume=3,229.03 | |||
|corrosionResistance=322 | |||
|suppressUnitsKg | |||
|suppressUnitsKv | |||
}} | |||
|{{SB Infobox Device IO | |||
|electricIn=10,000 e/s | |||
|electricOut= | |||
|energyCapacity= | |||
|coolantIn= | |||
|coolantOut= | |||
|coolantCapacity= | |||
|coolantRefresh= | |||
|heatGeneration= | |||
|heatDissipation | |||
|propellantIn= | |||
|propellantOut= | |||
|propellantCapacity | |||
|fuelIn= | |||
|fuelOut= | |||
|fuelCapacity | |||
|sockets=4 | |||
|YOLOLchips= | |||
|blueprintChips= | |||
|modInterfaces=8 | |||
|deviceInterfaces= | |||
}} | |||
|{{SB Infobox Device Construction | |||
|headerOverride= | |||
|aegisium= | |||
|ajatite=14% | |||
|arkanium= | |||
|bastium=11% | |||
|charodium=15% | |||
|corazium= | |||
|exorium= | |||
|haderite= | |||
|ice= | |||
|ilmatrium= | |||
|karnite= | |||
|kutonium= | |||
|lukium= | |||
|merkerium=20% | |||
|nhurgite= | |||
|oninum= | |||
|surtrite= | |||
|tengium=22% | |||
|ukonium=8% | |||
|valkite= | |||
|vokarium=10% | |||
|xhalium= | |||
}} | |||
}}<section begin=summary/>Used with station or ship blueprint chips to automate the building of a blueprint.<section end=summary/> | |||
== Basic information == | == Basic information == | ||
===Small 3D Printer=== | ===Small 3D Printer=== | ||
The small 3D printer is a smaller, but slower version of the large printer. It has an integrated utility box and can accept it's own [[fuel rod]], or use power provided from other sources | The small 3D printer is a smaller, but slower version of the large printer. It has an integrated utility box and can accept it's own [[fuel rod]], or use power provided from other sources | ||
Revision as of 12:36, 27 May 2021
3D Printer
Type Station device
Function Constructs station parts
Availability X Constructs
Size 216×108×216 cm
Mass 32,128.85 kg
Volume 3,229.03 kv
Corrosion resistance 322
Input / Output
Electric input 10,000 e/s
Sockets 4
Modular interfaces 8
Composition
Used with station or ship blueprint chips to automate the building of a blueprint.
Basic information
Small 3D Printer
The small 3D printer is a smaller, but slower version of the large printer. It has an integrated utility box and can accept it's own fuel rod, or use power provided from other sources
3D Printer
The large 3D printer requires a Utility box to connect to a station's power grid and to access the station inventory for material and to output complete parts.
How to use
Small 3D Printer
- Insert fuel rod into the printer
- Insert the blueprint chip
- You can buy these from the Marketplace.
- Turn on the printer
- Change UtilityConnection field to 1, this is required to allow printer to put finished items into station storage.
- Change PrinterControl field to 1 and make sure PrinterOrderAmount is above 0 (should be 1 by default).
- Printer requires access to the building materials for each piece (through station storage or connected ore crates)
3D Printer
- Prepare the printer
- Requires a lot of power, it's recommended to use a Utility box and to purchase electricity to the station storage.
- Radiators must be used to cool the printer, one printer needs approximately 17 radiators.
- Printer needs to be connected to a storage. Use pipe connection with a Utility box.
- Insert a blueprint chip
- Turn on the printer
- Change PrinterControl field to 1.
- Printer requires access to the building materials for each piece (through station storage or connected ore crates)
Device fields
To learn more about the usage of fields, consult these wiki pages:
| YOLOL Field | Description | Range |
|---|---|---|
| PrintingRateLimit | [0, inf] | |
| PrintingRate | [0, inf] | |
| WorkingRateLimit | [0, inf] | |
| WorkingRate | Shows the time for the CurrentItemWorkRemaining at the current moment, affected by the radiator efficiency. | [0, inf] |
| CurrentItemWorkRemaining | Shows amount of work remaining for selected item, calculated every time CurrentItem changes and printer is on (-1 if printer is not on). | -1[0, inf] |
| UtilityConnection | Connects the printer's internal inventory to the station's/ship's inventory for material access and item output. | 0/1 |
| PrinterControl | Used to control the printer. 0: off, 1: on, -1: manual cancel of ongoing operation. | -1/0/1 |
| PrinterStatus | Current state of the printer. 0: idle, 1: waiting for materials, 2: printing, 3: waiting for output. | 0/1/2/3 |
| PrinterOrderAmount | Used to select the number of times full blueprint is printed. Decrements by 1 every time the final item on the blueprint is completed unless already at or below 0,
printer repeats from the first piece of not 0. -1 repeats printing indefinitely. |
-1[0, inf] |
| CurrentItem | Index of selected item within blueprint chip. | [0, inf] |
| BlueprintItemCount | Amount of items in currently inserted blueprint chip. Updated when blueprint chip is inserted or removed (0 if no chip). | [0, inf] |
Material
To learn more about materials, consult these wiki pages:
| Small Printer | Large Printer | |
|---|---|---|
| Weight (Kg) | 32 128 | 1 027 070 |
| Material Required (Kv) | ||
| Ajatite | 1 173 | 38 343 |
| Bastium | 921 | 767 |
| Charodium | 1 256 | 41 082 |
| Merkerium | 1 675 | 54 776 |
| Tengium | 1 843 | 60 254 |
| Ukonium | 670 | 21 910 |
| Vokarium | 838 | 27 388 |