Navigation receivers
Jump to navigation
Jump to search
Navigation receivers
Type Navigation device
Function Receives signals
Availability Luxury Items
Size
- 156×156×180 cm (large)
- 120×120×120 cm (small)
Mass
- 18,492.47 kg (large)
- 5,094 kg (small)
Volume
- 1,858.54 kv (large)
- 511.96 kv (small)
Corrosion resistance 380
Primary material Charodium
Input / Output
Electric input Passive
Device interfaces 1
Composition
A navigation receiver is a device that can receive signals sent out by Radio transmitters.
Basic information
- Have to be pointed to the direction of a transmitter.
- They only look for signals in the area they're pointed at. This means that receivers may have to scan areas section by section to find transmitter messages.
- If a receiver is in the range of a transmitter and is pointed towards the transmitter, the transmitter's message is set to the receiver's "Message"-field.
- Both large and small receivers currently have the same properties.
Device fields
YOLOL field | description | range |
---|---|---|
Message | Found message | 0 |
SignalStrength | Strength of the found signal, measured in meters | 0 |
ListenAngle | An angle of 180 coresponds to an omnidirectional receiver. | 0-180 |
TargetMessage | The message the receiver will exclusively listen to, 0 means listens to all | 0 |
TargetFrequency | The frequency the receiver will exclusively listen to, 0 means listens to all | 0 |
Frequency | The frequency of the transmitter currently listened to, 0 if no signal found. | 0 |
ReceiverPitch | Target pitch of the device | 0 |
ReceiverCurrentPitch | Current pitch of the device | 0 |
MaxRotation | Maximum limit for rotation | 180 |
MinRotation | Minimum limit for rotation | -180 |
TargetVelocity | Target velocity in which the device rotates | 0-3 |
To learn more about how to use fields, consult these wiki pages: