|
|
|
|
|
|
|
Difference between revisions of "Turntable"
m (Text replacement - "[[Tractor beam|" to "[[Tractor beam (Assembly)|") |
m |
||
| Line 22: | Line 22: | ||
|mass=<ul><li>4,449.44 kg ''(large)''</li><li>660.68 kg ''(small)''</li></ul> | |mass=<ul><li>4,449.44 kg ''(large)''</li><li>660.68 kg ''(small)''</li></ul> | ||
|volume=<ul><li>447.18 kv ''(large)''</li><li>66.40 kv ''(small)''</li></ul> | |volume=<ul><li>447.18 kv ''(large)''</li><li>66.40 kv ''(small)''</li></ul> | ||
|corrosionResistance= | |corrosionResistance=300 | ||
|primaryMaterial=Bastium | |||
|suppressUnitsKg=1 | |suppressUnitsKg=1 | ||
|suppressUnitsKv=1 | |suppressUnitsKv=1 | ||
Revision as of 08:54, 13 July 2021
- 192×192×36 cm (large)
- 96×96×24 cm (small)
- 4,449.44 kg (large)
- 660.68 kg (small)
- 447.18 kv (large)
- 66.40 kv (small)
Turntables are mounted platforms for devices. Machinery such as cannons and tractor beams can be mounted on top of the turntables, which allow the device to rotate around the Y-axis. The mounted machinery must be mounted to a cradle to enable rotation around the X-axis.
Basic information
A turntable's target rotation can be set with the universal tool, or by connecting it to a control device such as a lever or a button. The turntable's turret rotation device field will rotate the turntable to the specified number in degrees, and does not allow relative adjustments (eg: +5 or -5). Each turntable has a base that must be mounted to a device base, and a rotating piece which can accept a variety of other machinery, such as cradles or weapon mounts. The speed at which a turntable rotates is determined by the mass attached to its rotating surface, and they are too weak to withstand the stress of a thruster. There are also provisions for sockets across turntables, which disallows users from cabling to devices mounted to a turntable.
Device fields
| YOLOL field | description | range |
|---|---|---|
| TurretRotation | Target rotation of the turntable | 0 |
| TurretCurrentRotation | Current rotation of the turntable | 0 |
| MaxRotation | High limit of the rotation | 180 |
| MinRotation | Low limit of the rotation | -180 |
| TargetVelocity | Target velocity in which the turntable rotates | 3 |
To learn more about how to use fields, consult these wiki pages: