|
|
|
|
|
|
|
Difference between revisions of "Gyroscope"
Jump to navigation
Jump to search
| Line 47: | Line 47: | ||
|vokarium=20% | |vokarium=20% | ||
|xhalium= | |xhalium= | ||
}} | |||
|{{SB Infobox Device Construction | |||
|headerOverride=Alloy used | |||
}} | |||
|{{Template:SB_Infobox_Section | |||
|[[Bastonium]]|35%[[Category:By composition - bastonium]] | |||
}} | }} | ||
}}<section begin=summary/>Gyroscope devices are used to track device rotation over yaw, pitch and roll axes relative to a calibrated 0-pose. Calibrate 0-pose by setting GyroCalibrateId to 1, it will automatically return to 0 after calibration is complete. | }}<section begin=summary/>Gyroscope devices are used to track device rotation over yaw, pitch and roll axes relative to a calibrated 0-pose. Calibrate 0-pose by setting GyroCalibrateId to 1, it will automatically return to 0 after calibration is complete. | ||
Revision as of 11:47, 5 April 2024
Gyroscope
Type Controls
Function Tracks device rotation
Size 48x48x24 cm
Mass 338.0 kg
Volume 38.951 kv
Primary material Bastium
Composition
Alloy used
Bastonium 35%
Gyroscope devices are used to track device rotation over yaw, pitch and roll axes relative to a calibrated 0-pose. Calibrate 0-pose by setting GyroCalibrateId to 1, it will automatically return to 0 after calibration is complete.
Due to the device's construction, roll delta values are limited to a range of [-90,90] and rolling further than that will cause the yaw and pitch values to change.
Basic information
- Gyroscope resets after each ship reloading/rehosting
- Gyroscope can work without electricity
Device fields
| YOLOL field | description | range |
|---|---|---|
| GyroCalibrate | Reset gyroscope and set a 0-position | 0 - 1 |
| GyroPitch | Pitch offset | -180 to 180 |
| GyroYaw | Yaw offset | -180 to 180 |
| GyroRoll | Roll offset | -90 to 90 |
To learn more about the usage of fields, consult these wiki pages: