Rangefinder

Rangefinder

Type YOLOL device

Function Measures distance

Size 72×72×6 cm

Mass 282.08 kg

Volume 28.35 kv

Corrosion resistance 430

Primary material Bastium

Input / Output

Electric input 1 e/s

Device interfaces 1

Composition

Ajatite 15%

Bastium 35%

Vokarium 50%

The range finder is a laser pointer that reports the distance to the object it hits. If the range finder does not hit anything, it reports the search distance. The finder can be used on endoskeletons and other objects such as asteroids and ships.

Basic information

Range finders can be used to:

• Trigger changes when the detected range changes.
• Create balance systems for space ships by comparing ranges on the opposite sides of a ship.
• Hover ship elevation control by comparing a elevation level to a range finder.

How to use:

• Range finders are bolted to a hardpoint.
• Requires a power source, such as the generator via cable or ducts.
• Once installed, its measured range can be found from RangeFinderDistance device field. RangeFinderDistance will show the value set in RangeFinderSearchLength if the beam doesn't hit anything.

Power consumption when turned on: 1 electricity per second.

Device fields

YOLOL field	description	range
RangeFinderOnState	Whether the range finder should try to be on. 0 is off, everything else is on.
RangeFinderSearchLength	The maximum distance to check for hits, up to the device's maximum. Measured in meters.	0 - 1000
RangeFinderDistance	The output field which reports the distance the laser goes. Measured in meters.

To learn more about how to use fields, consult these wiki pages:

• Universal Tool
• Data networks
• YOLOL