|
|
|
|
|
|
|
Levers
Summary
Levers are interactable devices used mainly for controlling devices and machinery.
Levers can also be used to change the value of fields between set minimum and maximum values.
Basic information
- One-directional levers have "zero" in one end and maximum in the opposite end.
- Lowering the maximum value lowers the given lever's maximum output to a device.
- Two-directional levers have minimum and maximum in the far ends and the middle/neutral value is 50.
- Minimum output has to be below 50. Default is 0.
- Maximum has to be above 50. Default is 100.
Device fields
To learn more about how to use fields, consult these wiki pages:
| YOLOL field | description | range |
|---|---|---|
| LeverState | Lever's current state between LeverMinOutput and LeverMaxOutput | LeverMinOutput - LeverMaxOutput |
| LeverMinOutput | Unidirectional - Output in low end, Bidirectional - Output in left end | |
| LeverMaxOutput | Unidirectional - Output in high end, Bidirectional - Output in right end | |
| LeverCenterOutput | Output value when the lever is in the center | |
| LeverCenterDeadZone | How large is the dead zone in the center of an unidirectional lever | |
| LeverCenteringSpeed | How fast does (unidirectional lever reset to low end)(bidirectional lever reset to center) once released | |
| LeverBindsMoveSpeed | How fast does the lever move with binds |