|
|
|
|
|
|
|
Cooling rack
Revision as of 00:50, 20 August 2020 by Duke Ironhelm (talk | contribs) (added to Category:Devices and machines)
Summary
- The cooling board can hold up to three cooling cells.
- Receives Coolant from the cooling cells and processes it to reduce Heat.
- The cooling board can be placed anywhere. The cooling pipes running through the whole system will handle the cooling of all the fuel chambers and generator units.
- It can also be placed on a separate coolant socket board and connected to the generator network through pipes.
- Only the calculated amount of Heat that the system produces is relevant. The cooling power of the cooling board must match the Heat amount produced, or preferably exceed it.
- There is only one connector on the cooling board.
Cooling cells
- Stores the Coolant.
- Placed inside a cooling board.
- Distributes Coolant to the cooling board.
- Cooling Cells can be recharged in a Coolant recharge rack.
Device fields
To learn more about how to use fields, consult these wiki pages:
Cooling Rack
| YOLOL field | Description | Range |
|---|---|---|
| CoolerUnitRateLimit | Upper limit for conversion rate for this cooler | 0 - 100 |
| CoolerUnitRate | Current conversion rate for this cooler. Conversion is being performed at 1 conversion * this percentage per second. | 0 - 100 |
Cooling Cell
| YOLOL field | Description | Range |
|---|---|---|
| CoolantPriority | Lower values are used first | |
| UsedCoolantPriority | Lower values are used first | |
| StoredCoolant | The amount of coolant currently available in this cell | 0 - 5000 |
| MaxCoolant | Maximum amount of coolant that can be stored in a coolant cell | 5000 |