Генератор (Собранный)

Описание

Генератор - одна из наиболее важных частей любой постройки, которая требует энергии. Большинство кораблей, к примеру, требуют для работы правильно собранный генератор.

• Каждый требующий питания механизм на корабле должен быть присоединён к генератору при помощи провода.
• Генератор состоит из нескольких модулей, которые нужно собирать в определённой последовательности, скрепляя друг с другом.
• Генератор должен быть размещён в безопасном месте, защищённом от таких опасностей как радиация или стрельба.

Обычно генератор состоит из как минимум одной генераторной установки, одной системы охлаждения с охлаждающими ячейками, одной топливной ячейки с топливным стержнем и одной платы с разъёмами.

Основная информация

Модули можно комбинировать по разному, создавая генератор, заточенный под определённые потребности и цели. В зависимости от целей, генераторы могут отличаться формой, размером и эффективностью.

Генератор может состоять из следующих модулей:

• Топливный стержень (Это ёмкость для неочищенного топлива, которое будет переработано в топливной ячейке для дальнейшей выработки энергии)
• Топливная ячейка (Топливный стержень помещается в топливную ячейку. Неочищенное топливо в дальнейшем перерабатывается в очищенное топливо в топливной ячейке.)
• Генераторная установка (В генераторной установке очищенное топливо перерабатывается в энергию)
• Система охлаждения (Охлаждающие ячейки помещаются сюда и хладагент перерабатывается для снижения температуры)
• The socket board (For attaching cables)
• Enhancers (For improving efficiency, in three different tiers)

A generator creates its own resource network within which it distributes and processes five different resources:

• Raw Fuel - Stored in the fuel rod.
• Processed Fuel - Processed in the fuel chamber from Raw Fuel.
• Power - Processed in the generator unit from Processed Fuel.
• Heat - Produced from the two latter processes, the processing of raw fuel and the processing of power.
• Coolant - Stored in the cooling cells. Processed in the cooling board to reduce Heat.

Generator modules

Fuel rod

• Stores the Raw Fuel.
• Placed inside a fuel chamber.
• Distributes Raw Fuel to the fuel chamber.

The fuel chamber

• Receives Raw Fuel from the fuel rod and converts it to Processed Fuel.
  • This process also generates Heat.
• Distributes Processed Fuel to generator units.
• There are nine connectors, two on each long side and one on the "back" side of the chamber.
• Other modules can be attached to the connectors.
• If an enhancement effect is used on the fuel chamber, the efficiency rate of processing Processed Fuel from Raw Fuel increases.

The generator unit

• Receives Processed Fuel from the fuel chamber and converts it to Power.
  • This process also generates Heat.
  • NOTE! The generators will constantly consume Processed fuel, wasting excess Power unless their ConversionRateLimit is modified via YOLOL
• There are six connectors, one on each side.
• Other modules can be attached to the connectors.
  • For every adjacent generator unit, extra heat will be generated.
  • Tip: If generator units are stacked close together, extra benefit can be gained from the enhancers. However, this generates more heat, which must be cooled down.
• If an enhancement effect is used on the generator unit, the efficiency of processing Power from Processed Fuel increases.

The cooling cells

• Stores the Coolant.
• Placed inside a cooling board.
• Distributes Coolant to the cooling board.

The cooling board

• The cooling board can hold up to three cooling cells.
• Receives Coolant from the cooling cells and processes it to reduce Heat.
• The cooling board can be be placed anywhere. The cooling pipes running through the whole system will handle the cooling of all the fuel chambers and generator units.
• Only the calculated amount of Heat that the system produces is relevant. The cooling power of the cooling board must match the Heat amount produced, or preferably exceed it.
• There is only one connector on the cooling board.
• If an enhancement effect is used on the cooling board, the efficiency rate of reducing Heat from processing Coolant increases.

The socket board

• Transforms Local Power into Power.
• Connects cables.
• Distributes Power to a data network.
• There is only one connector on the socket board.
• Doesn't get any benefits from enhancers.

Enhancers

• Casts a beam that goes through modules. If the beam hits a module, that module gets the benefit of the enhancement.
• There are three tiers on the enhancement modules.
  • A tier that casts a beam that can reach 96 cm (only the module it is attached to).
  • A tier that casts a beam that can reach 192 cm (possibly two modules).
  • A tier that casts a beam that can reach 288 cm (possibly three modules).
• There is only one connector on the enhancer.
• Enhancers don't get benefits from other enhancers.
• If several beams are hitting the same module, there will be extra benefit, but no cumulative benefits.

Device fields

To learn more about how to use fields, consult these wiki pages:

• Universal Tool
• Data networks
• YOLOL

YOLOL field	Description	Range
FuelChamberFuel	The amount of fuel currently available in this chamber's tank	0 - FuelChamberMaxFuel
FuelChamberMaxFuel	Maximum amount of fuel that can be stored in this chamber's tank	Default 200000
FuelChamberUnitRateLimit	Upper limit for conversion rate for this fuel chamber	0 - 100
FuelChamberUnitRate	Current conversion rate for this fuel chamber. Conversion is being performed at 1 conversion * this percentage per second.	0 - 100
GeneratorUnitRateLimit	Upper limit for conversion rate for this generator block	0 - 100
GeneratorUnitRate	Current conversion rate for this generator block. Conversion is being performed at 1 conversion * this percentage per second.	0 - 100
StoredCoolant	The amount of coolant currently available in this cell	0 - MaxCoolant
MaxCoolant	Maximum amount of coolant that can be stored in a coolant cell	Default 5000
CoolerUnitRateLimit	Upper limit for conversion rate for this cooler	0 - 100
CoolerUnitRate	Current conversion rate for this cooler. Conversion is being performed at 1 conversion * this percentage per second.	0 - 100
SocketUnitRateLimit	Upper limit for conversion rate for this socket	0 - 100
SocketUnitRate	Current conversion rate for this socket. Conversion is being performed at 1 conversion * this percentage per second.	0 - 100