|
|
| (105 intermediate revisions by 16 users not shown) |
| Line 1: |
Line 1: |
| A collection of small common scripts meant to be easily copied and understood for the [[YOLOL|YOLOL]] beginners.
| | ==Standard Generator Script== |
|
| |
|
| ''This page is a "Work In Progress". Don't hesitate to contribute! Just make sure to respect the following rules:
| | ===Default Fields=== |
| * Avoid complex codes. As said, These must be easily understood by beginners. If you can't simplify your scripts, please add some comments to explain the most technical parts.
| |
| * Avoid as possible to modify the [[Device fields|device fields]]. If necessary, it must be specified which field has to be renamed (left column) and/or set to a given value (right column). ''
| |
|
| |
|
| ==[[Flight control unit|Flight Control Unit]]== | | :FuelChamberUnitRateLimit=100-:StoredBatteryPower/100 goto 1 |
|
| |
|
| ===Single Forward/Backward Lever=== | | ===Non Default Fields=== |
| Requires a center lever bound to '''"FcuForward"'''. ''Note: You can easily modify the default regular lever from most prebuilt ships and cockpit modules to be used as a center Lever. Just change the '''"LeverMinOutput"''' value from 0 to -100. Also don't forget to modify your control binds ("V" on keyboard by default).''
| |
|
| |
|
| :FcuBackward=-:FcuForward goto1 | | :limit=100-:bat/100 goto 1 |
|
| |
|
| ===Speed Limiter===
| | ''Note: It is recommended that you change the fuel chamber, not the generator unit, so the generator doesn't need to slowly spool up.'' |
| Requires to modify the lever bound to '''"FcuForward"''' which shall be renamed '''"Fwd"''' and another regular lever with '''"LeverState"''' renamed '''"Limiter"'''. This script allow you to set a maximum forward speed to your ship, which is useful when you need more accurate movements (e.g. while mining or docking).
| |
|
| |
|
| :FcuForward=:Fwd/100*:Limiter goto1
| |
|
| |
|
| ''Note: If you already modified your '''"FcuFoward"''' lever to be used as a '''"Single Forward/Backward Lever"''' (see above), you can use the '''"Backward"''' lever made useless as the '''"Limiter"''' lever. Just make sure you have '''"FcuForward"''' renamed '''"FwdBwd"''' instead so you can modify forward and backward thrust individually. This way your YOLOL scripts should be written as follows:''
| | ==Single lever forward/backward script== |
|
| |
|
| :FcuForward=:FwdBwd/100*:Limiter goto1
| | ===Default device fields=== |
|
| |
|
| :FcuBackward=-:FwdBwd goto1 | | :FcuBackward=-:FcuForward goto 1 |
|
| |
|
| ===Turtle Mode===
| | ''Note: This script assumes you have a center lever bound to FcuForward'' |
| Similar to the previous script but with a button instead of a lever. '''"ButtonState"''' should be renamed '''"Turtle"''' and '''"ButtonStyle"''' set to '''"1"'''. In addition set the '''"ButtonOffStateValue"''' to '''"100"''' and the '''"ButtonOnStateValue"''' to the desired speed reduction. For example having '''"30"''' means 30% of maximum speed when the button is active.
| |
|
| |
|
| :FcuForward=:Fwd/100*:Turtle goto1
| |
|
| |
|
| ==[[Fuel chamber|Fuel Chamber]]==
| |
|
| |
|
| The following scripts are made to be used with the ship "[[Laborer module|Laborer Module]]" rewarded during the tutorials. To make it compatible with other prebuilt or own-made ships, refer to the table below for the corresponding modifications in the [[Device fields|device fields]]. ''Note: Most scripts make the "Generator" button irrelevant as it replace its use. Some may make another use of it.''
| | ''This page is a WIP. Please contribute to it!'' |
| | |
| {| class="wikitable"
| |
| ! Ship Part !! Default Field Name !! Laborer Module Field Name
| |
| |-
| |
| | Hybrid Button || ButtonState || Generator
| |
| |-
| |
| | Fuel Chamber || FuelChamberUnitRateLimit || Generator
| |
| |-
| |
| | First Battery || StoredBatteryPower || Battery_1
| |
| |-
| |
| | Second Battery || StoredBatteryPower || Battery_2
| |
| |}
| |
| | |
| Also, ships will require enough batteries to act as buffers during the generator spool up time. ''Note: When in use, all batteries discharge at the same rate. The more batteries you have, the slower the discharge is.''
| |
| | |
| ===Gradual Generator Script===
| |
| Makes the fuel rate limit of the fuel chamber inversely proportional to the charge level of the batteries.
| |
| | |
| :Generator=100-:Battery_1/100 goto1
| |
| | |
| Alternatively, the script below will keep the batteries fuller by setting the fuel rate limit to its maximum when batteries are below 90% of charge.
| |
| | |
| :Generator=1000-:Battery_1/10 goto1
| |
| | |
| Additionally, you can use the "Generator" button by renaming it "Eco" so it switch fuel saving on and off with the following script. Useful for more power consuming activities like mining.
| |
| | |
| :Generator=100-:Eco*:Battery_1/100 goto1
| |
| | |
| ===Flagged Generator Script===
| |
| This script set the fuel rate limit to 25% (just enough to supply 2 box thrusters with a bit of spare charge) if the level of the batteries is below 9999 and adding 50% if below 5000. 0.001% is enough fuel rate to let the generator "sleep" when the ship stand still and the batteries are full.
| |
| | |
| :Generator=25*(:Battery_1<9999)+50*(:Battery_1<5000)+0.001 goto1
| |
| | |
| ===Advanced Generator Script===
| |
| This script is tweakable to your ship configuration. Field names are those of the Laborer Module, except for the '''"Generator"''' button which should be renamed '''"PWR"''' so the script can control the fuel rate while the button still being functional. Optionally you can add an override lever with '''"LeverState"''' renamed '''"PWR"''' as well.
| |
| | |
| MaxBattery=20000 // total capacity
| |
| LowBattery=0.99*MaxBattery // start charging below 99%
| |
| MinBattery=0.20*MaxBattery // max charge rate below 20%
| |
| MaxGenerator=100 // max fuel rate
| |
| MinGenerator=2 // min fuel rate (near 100% charge)
| |
| h=MaxGenerator c=MinGenerator // auxiliary variables,
| |
| f=MaxBattery l=LowBattery e=MinBattery // no need to change these
| |
| r=(h-c)/(f-e) z=h-r*l a=r*(f-l) // reboot: remove "goto9" briefly
| |
| y=:PWR-z-r*(:Battery_1+:Battery_2)+c*(y>c)+a*(y>0) :Generator=y goto9
| |
| | |
| It is assumed that the following device fields are set as explained (''Note: The "PWR" button is already set up in the Laborer Module''):
| |
| | |
| {| class="wikitable"
| |
| ! Ship Part !! Field Name !! Set Field value | |
| |-
| |
| | "PWR" Button || ButtonOnStateValue|| 100
| |
| |-
| |
| | "PWR" Button || ButtonOffStateValue|| 0
| |
| |-
| |
| | "PWR" Button || ButtonStyle || 1
| |
| |-
| |
| | "PWR" Lever (optional) || LeverMinOutput || 0
| |
| |-
| |
| | "PWR" Lever (optional) || LeverMaxOutput || 200
| |
| |-
| |
| | "PWR" Lever (optional) || LeverCenteringSpeed || 0
| |
| |}
| |
| | |
| ==[[Material point scanner|Material Point Scanner]]==
| |
| | |
| ===Material Point Scanner Script===
| |
| Requires two displays for '''"Material"''' and '''"Volume"''', two buttons to toggle the '''"Active"''' and '''"Scan"''' fields of the scanner, and a third button with '''"ButtonState"''' renamed '''"Next"''' and '''"ButtonStyle"''' set to '''"1"'''.
| |
| | |
| :Index=(:Index+:Next)*(:Index<:ScanResults) :Next=0
| |
| :Material=:Material :Volume=:Volume goto1
| |
| | |
| ===Automatic Material Point Scanner Script===
| |
| This is a modified version of the above script so it can be used when the scanner is '''"Active"''' without the need of any additional buttons.
| |
| ''Note: launching a new scan reinitialize the index to '''"0"'''.''
| |
| | |
| :Scan=1
| |
| //Pause
| |
| :Index=Next
| |
| Next=(Next+1)*(Next<:ScanResults)
| |
| :Material=:Material :Volume=:Volume goto1
| |
| | |
| ==[[Mining laser|Mining Laser]]==
| |
| ''Note: [[Mining laser|Mining Lasers]] were updated to have an activation cost, which is why pulsing lasers is not economic anymore.''
| |
| ===Pulsed Mining Laser===
| |
| Requires a button with '''"ButtonState"''' renamed '''"Mining"''' and '''"ButtonStyle"''' set to '''"1"'''. Reduces power consumption by continuously switching mining laser "On" and "Off" while the button is active.
| |
| | |
| :MiningLaserOn=(1-:MiningLaserOn)*:Mining goto1
| |
| | |
| ===Configurable Pulsed Mining Laser===
| |
| Similar to the previous script but with configurable timers for the "On" and "Off" phases of the laser.
| |
| ''Note: Each phase is calculated in a number of YOLOL "tick" (0.2sec). So in the example, the "On" phase last 2*0.2=0.4sec and the "Off" phase 3*0.2=0.6 sec, which makes the power comsumption just a bit lower than the power production of a regular generator module (= one fuel chamber and three generator units, all in tier 1).''
| |
| | |
| On=2 Off=3 :MiningLaserOn=(T<On)*:Mining T++ T*=T<(On+Off) goto1
| |
| | |
| ==[[Navigation receivers|Navigation Receiver]]==
| |
| | |
| ===Received Signal Display===
| |
| Requires a text panel with '''"PanelValue"''' renamed '''"Nav"'''.
| |
| | |
| if :SignalStrength>0 then goto2 else :Nav="No Signal" goto1 end
| |
| :Nav=:Message+"\n"+(1000000-:SignalStrength)/1000+"km" goto1
| |
| | |
| ==[[Ore collector|Ore Collector]]==
| |
| | |
| ===Mining Laser/ Ore Collector Swapping Power===
| |
| Requires a button with '''"ButtonState"''' renamed '''"Collecting"''' and '''"ButtonStyle"''' set to '''"1"'''. Reduces power consumption by switching ore collector "On" only if the button is active And the mining laser is "Off". ''Note: this script works best alongside the "Pulsed Mining Laser" scripts.''
| |
| | |
| :ToggleOn=(1-:MiningLaserOn)*:Collecting goto1
| |
| | |
| ==[[Ship transponder|Ship Transponder]]==
| |
| | |
| ===Outside Safezone Warning===
| |
| Requires an active transponder and either a warning button or a safety lid button. The button blink whenever you're outside of the safe zone. ''Note: the button needs to be active in order to blink.''
| |
| | |
| :ButtonEnableBlink=1-:InsideSafeZone goto1
| |
| | |
| ===Stations Building Availability===
| |
| Same as the previous one, but the button blink wherever you're allowed to build a station.
| |
| | |
| :ButtonEnableBlink=:StationsAllowed goto1
| |
| | |
| [[Category:Networks|Common YOLOL]]
| |
